Putting Molding On Kitchen Cabinet Doors

Putting Molding On Kitchen Cabinet Doors: A Comprehensive Guide

Molding is an excellent way to add character and style to your kitchen cabinets. It can help you create a more cohesive look, and it can also make your cabinets look more expensive. However, putting molding on kitchen cabinet doors can be a bit tricky. Here is a step-by-step guide to help you get the job done right.

### Tools and Materials

You will need the following tools and materials:

Molding
Miter saw
Nail gun
Brad nails
Wood filler
Sandpaper
Paint or stain (optional)

### Step 1: Measure and Cut the Molding

Start by measuring the length of the door that you want to add molding to. Then, cut the molding to the correct length using a miter saw. Make sure that the molding is cut at a 45-degree angle.

### Step 2: Attach the Molding to the Door

Once you have cut the molding, you need to attach it to the door. To do this, apply a thin layer of wood glue to the back of the molding. Then, place the molding on the door and nail it into place using a brad nailer.

### Step 3: Fill in the Nail Holes

Once the molding is attached, you need to fill in the nail holes. To do this, apply a small amount of wood filler to each nail hole. Then, smooth the wood filler over the nail holes using your finger or a putty knife.

### Step 4: Sand the Molding

Once the wood filler has dried, you need to sand the molding. This will help to smooth out the surface of the molding and make it look more professional.

### Step 5: Paint or Stain the Molding (Optional)

If you want, you can paint or stain the molding to match the color of your cabinets. To do this, apply a thin coat of paint or stain to the molding using a brush or a rag. Allow the paint or stain to dry completely before using the cabinets.

### Additional Tips

Here are a few additional tips for putting molding on kitchen cabinet doors:

Use a sharp saw blade to cut the molding. This will help to prevent the molding from splintering.
Make sure that the molding is cut at a 45-degree angle. This will help to ensure that the molding fits together properly.
Apply a thin layer of wood glue to the back of the molding before attaching it to the door. This will help to hold the molding in place.
Fill in the nail holes with wood filler. This will help to hide the nail holes and make the molding look more professional.
Sand the molding to smooth out the surface. This will help to make the molding look more finished.
Paint or stain the molding to match the color of your cabinets. This will help to create a more cohesive look.