Making Kitchen Cabinet Doors From Plywood

Kitchen cabinet doors are an important part of the overall design of your kitchen. They can make a big impact on the look and feel of the space, and they can also be a great way to add some personality to your home. If you're looking for a way to update your kitchen without breaking the bank, making your own cabinet doors is a great option. It's a relatively easy project that can be completed in a weekend, and it can save you a lot of money.

Here's a step-by-step guide to making kitchen cabinet doors from plywood:

Materials

3/4-inch plywood
1x4 pine boards
Wood glue
1-1/4-inch wood screws
Brad nails
Sandpaper
Paint or stain

Tools

Circular saw
Table saw
Miter saw
Drill
Countersink bit
Brad nailer
Sander

Instructions

Cut the plywood to the desired size of your cabinet doors. The standard size for kitchen cabinet doors is 18 inches wide by 30 inches high, but you can adjust the size to fit your specific needs.
Cut a rabbet around the edges of the plywood using a table saw. The rabbet should be 1/4-inch wide and 1/4-inch deep. This will create a lip around the edges of the plywood that the door frame will fit into.
Cut the 1x4 pine boards to length to create the door frame. The length of the boards will vary depending on the size of your cabinet doors. The standard size for kitchen cabinet doors is 18 inches wide by 30 inches high, so the length of the boards would be 18 inches for the top and bottom rails and 30 inches for the side stiles.
Assemble the door frame by gluing and screwing the 1x4 pine boards together. Be sure to countersink the screws so that they are flush with the surface of the wood.
Attach the door frame to the plywood by gluing and nailing it in place. Be sure to center the door frame on the plywood and to ensure that the rabbet is facing inward.
Sand the door frame and plywood to smooth out any rough edges. You can also use a sander to round over the edges of the door frame for a more finished look.
Paint or stain the cabinet doors to your desired finish.

Once the cabinet doors are dry, you can install them on your kitchen cabinets. Be sure to follow the manufacturer's instructions for installing the cabinet doors.