How To Refinish 1960 S Kitchen Cabinets

How to Refinish 1960s Kitchen Cabinets

Do you have 1960s kitchen cabinets that are looking a little tired and dated? Refinishing them is a great way to update your kitchen without breaking the bank, and it's a project that most DIYers can tackle with a little patience and care.

Here's a step-by-step guide to refinishing 1960s kitchen cabinets:

1. Clean the cabinets:

Start by cleaning the cabinets with a mixture of warm water and dish soap. Remove all the hardware, and be sure to get into all the nooks and crannies. Once the cabinets are clean, let them dry completely.

2. Sand the cabinets:

Using a sanding block, sand the cabinets lightly in the direction of the grain. This will help to smooth out any imperfections in the surface and create a good surface for the new finish. Be sure to wear a dust mask while sanding.

3. Prime the cabinets:

Applying a coat of primer to the cabinets will help to seal the wood and prevent the new finish from absorbing into the wood. Use a high-quality primer that is specifically designed for kitchen cabinets.

4. Paint the cabinets:

Once the primer is dry, you can start painting the cabinets. Use a high-quality paint that is specifically designed for kitchen cabinets. Apply thin, even coats, and allow each coat to dry completely before applying the next.

5. Install the hardware:

Once the paint is dry, you can reinstall the hardware. Be sure to use new screws, as the old ones may be stripped.

With a little time and effort, you can refinish your 1960s kitchen cabinets and give your kitchen a whole new look. Here are a few tips to make the project go smoothly: