How To Put Glass Inserts In Kitchen Cabinet Doors

How to Put Glass Inserts in Kitchen Cabinet Doors

Adding glass inserts to kitchen cabinet doors is an excellent way to create a more stylish and open look in your kitchen. It's a relatively easy project that can be completed in a few hours with the right tools and materials.

Materials You'll Need

Glass inserts (cut to size)
Glazing points
Putty knife
Hammer
Measuring tape
Pencil

Instructions

1. Remove the cabinet doors:

Start by removing the cabinet doors from the hinges. Place them on a flat surface, such as a table or countertop.

2. Measure and mark the glass inserts:

Measure the inside dimensions of the cabinet door frame and transfer these measurements to the glass inserts. Mark the measurements lightly with a pencil.

3. Apply the glazing points:

Glazing points are small, triangular-shaped pieces of metal that hold the glass in place. Position the glazing points around the edges of the glass insert, spacing them evenly apart. Tap them gently into place with a hammer.

4. Insert the glass:

Carefully insert the glass into the cabinet door frame, making sure that it rests securely against the glazing points. Tap the glazing points further into place until the glass is snugly held.

5. Trim excess glazing points:

Once the glass is securely in place, use a utility knife to trim any excess glazing points that extend beyond the edge of the cabinet door frame.

6. Clean up:

Wipe away any excess putty or debris from the glass and cabinet door frame. Reinstall the cabinet doors onto the hinges.

Tips for Success

Wear gloves and safety glasses when working with glass.
Measure carefully to ensure that the glass inserts fit snugly into the cabinet door frames.
Use a sharp putty knife to trim excess glazing points cleanly.
If you are not comfortable working with glass, consider hiring a professional to do the job.