How To Measure For Replacement Kitchen Cabinet Doors

How to Measure for Replacement Kitchen Cabinet Doors

Replacing your kitchen cabinet doors is a great way to update the look of your kitchen without breaking the bank. However, before you order new doors, it is important to take accurate measurements. Here is a step-by-step guide to measuring for replacement kitchen cabinet doors:

Step 1: Remove the Old Doors

To get an accurate measurement, you will need to remove the old doors from the cabinets. If you are not sure how to do this, you can refer to the manufacturer's instructions.

Step 2: Measure the Opening

Once the old doors are removed, you need to measure the opening of the cabinet. Measure the width, height, and depth of the opening from the inside edge of the frame.

Step 3: Measure the Diagonal

To make sure that the cabinet opening is square, measure the diagonal distance from one corner of the opening to the opposite corner. If the two measurements are not the same, the opening is not square and you will need to adjust your measurements accordingly.

Step 4: Order New Doors

Once you have taken your measurements, you can order new cabinet doors. When ordering, be sure to provide the width, height, and depth of the opening, as well as the diagonal measurement.

Step 5: Install the New Doors

Once the new doors arrive, you can install them following the manufacturer's instructions. Be sure to check that the doors fit properly before securing them in place.

Tips for Measuring for Replacement Kitchen Cabinet Doors

Use a tape measure that is accurate to 1/16 of an inch.
Take multiple measurements to ensure accuracy.
If you are not sure about the measurements, it is always best to consult with a professional.
Order doors that are slightly larger than the opening, as they can be trimmed to fit.
Installing new kitchen cabinet doors is a relatively easy project that can be completed in a weekend.