How To Install A Corner Kitchen Sink Cabinet

Installing a corner kitchen sink cabinet can be a bit more challenging than installing a standard cabinet, but it's still a doable project for most DIYers. Here's a step-by-step guide to help you get the job done right.

Tools and Materials

Before you start, gather the following tools and materials:

Corner kitchen sink cabinet
Phillips head screwdriver
Level
Tape measure
Pencil
Construction adhesive
Caulk

Step 1: Prepare the Cabinet

Start by removing the doors and drawers from the cabinet. Then, place the cabinet in the corner of your kitchen where you want it to go. Use a level to make sure the cabinet is level both front-to-back and side-to-side.

Step 2: Attach the Cabinet to the Wall

Once the cabinet is level, use a pencil to mark the location of the mounting holes on the back of the cabinet. Then, pre-drill pilot holes for the screws. Apply a bead of construction adhesive to the back of the cabinet, and then attach the cabinet to the wall using the screws.

Step 3: Install the Doors and Drawers

Once the cabinet is attached to the wall, you can reattach the doors and drawers. Use a Phillips head screwdriver to tighten the screws.

Step 4: Caulk the Joints

To prevent water from leaking into the cabinet, caulk all of the joints between the cabinet and the wall. Use a caulk gun to apply a bead of caulk around the edges of the cabinet, and then smooth it out with your finger.