How To Fix A Broken Kitchen Drawer Front Pull

How to Fix a Broken Kitchen Drawer Front Pull

A broken kitchen drawer front pull can be a frustrating inconvenience. Whether it's a loose screw or a snapped-off handle, it can make it difficult to open and close the drawer properly. Fortunately, fixing a broken drawer pull is a relatively simple task that can be done in a few minutes with the right tools and materials.

Tools and Materials

Phillips head screwdriver
Flat head screwdriver
Replacement screws (if necessary)
Drill (if necessary)
Wood filler (if necessary)
Sandpaper (if necessary)

Steps

1. Remove the broken pull. Using a Phillips head screwdriver, remove the screws that hold the pull in place. If the pull is broken off, you may need to use a flat head screwdriver to pry it loose. 2. Inspect the drawer front. Once the pull is removed, inspect the drawer front for any damage. If there are any holes or cracks, they will need to be repaired before installing a new pull. 3. Fill in any holes or cracks. If there are any holes or cracks in the drawer front, fill them in with wood filler. Allow the wood filler to dry completely. 4. Sand the surface. Once the wood filler is dry, sand the surface until it is smooth. 5. Install the new pull. Position the new pull on the drawer front and secure it with screws. Make sure the screws are tight enough to hold the pull in place, but not so tight that they strip the wood. 6. Enjoy your repaired drawer. Your repaired drawer is now ready to use. Simply open and close it to make sure that the pull is working properly.

Tips

If the screws that hold the pull in place are stripped, you may need to drill new holes.
If the drawer front is made of a soft material, such as pine, you may want to use a washer between the pull and the drawer front to prevent the screws from pulling through the wood.
If you are not sure how to fix a broken drawer pull, consult a professional.