How To Install Recessed Lighting Under Kitchen Cabinets In Bedroom

How to Install Recessed Lighting Under Kitchen Cabinets In Bedroom

Adding recessed lighting under kitchen cabinets is a great way to increase the amount of light in your kitchen and create a more inviting atmosphere. It's also a relatively easy project to do yourself, even if you're not a professional electrician. Here's a step-by-step guide on how to install recessed lighting under kitchen cabinets:

Materials You'll Need:

Recessed lighting fixtures
Junction box
Electrical wire
Drill
Hole saw
Screwdriver
Wire cutters/strippers
Safety glasses
Gloves

Step 1: Plan the Layout

Before you start, you need to plan the layout of your recessed lighting. Decide how many lights you want to install and where you want to place them. Make sure to space the lights evenly and avoid placing them too close to the edges of the cabinets.

Step 2: Mark the Locations

Once you have a plan, use a pencil to mark the locations of the lights on the bottom of the cabinets. Make sure to mark the center of each light fixture.

Step 3: Drill the Holes

Use a hole saw to drill a hole for each light fixture. The size of the hole will depend on the size of the light fixture you're using.
Tip: Use a drill bit that is slightly smaller than the diameter of the light fixture. This will help to prevent the light fixture from falling out of the hole.

Step 4: Install the Junction Box

Install a junction box in the ceiling above the kitchen cabinets. The junction box will house the electrical connections for the lights.

Step 5: Run the Electrical Wire

Run the electrical wire from the junction box to each light fixture. Make sure to leave enough slack in the wire so that you can easily connect the lights to the junction box.

Step 6: Connect the Lights

Connect the lights to the electrical wire using wire nuts. Make sure to twist the wire nuts securely and tape them up with electrical tape.

Step 7: Install the Light Fixtures

Insert the light fixtures into the holes in the cabinets. Make sure to push the lights in until they are flush with the surface of the cabinets.

Step 8: Turn on the Lights

Turn on the lights to make sure they are working properly.

Tips:

If you're not comfortable working with electricity, it's best to hire a professional electrician to install the recessed lighting.
Make sure to turn off the power to the kitchen before you start working on the electrical system.
Wear safety glasses and gloves when working with power tools.
Be careful not to drill into any electrical wires or water pipes when drilling the holes for the light fixtures.
Use a level to make sure that the light fixtures are installed straight.