How To Add Kitchen Cabinet Hardware

How to Add Kitchen Cabinet Hardware

Adding new hardware to your kitchen cabinets is a quick and easy way to update their look and feel. It's a relatively simple project that can be accomplished in a few hours with just a few tools. Here's a step-by-step guide on how to add kitchen cabinet hardware:

Materials You'll Need:

New cabinet hardware (e.g., knobs, pulls, handles)
Drill
Screwdriver
Measuring tape or ruler
Pencil or marking tool

Step 1: Measure and Mark the Cabinet Doors or Drawers

Determine the placement of the hardware on the cabinet doors or drawers. Use a measuring tape or ruler to find the center of each door or drawer. Mark the center point with a pencil or marking tool.

Step 2: Drill Pilot Holes

Use a drill to create pilot holes for the screws. Pilot holes should be slightly smaller than the diameter of the screws you'll be using. Drill the pilot holes at the marked center points.

Step 3: Attach the Hardware

Insert the screws through the hardware and into the pilot holes. Tighten the screws using a screwdriver until the hardware is securely attached to the cabinet door or drawer.

Step 4: Check for Level and Adjust

Once the hardware is installed, check to make sure it's level. If not, adjust the screws accordingly until the hardware is level and straight.

Tips:

Use a template to ensure accurate placement and spacing of the hardware.
Select hardware that complements the style of your kitchen cabinets and décor.
Consider the size and shape of the cabinet doors or drawers when choosing hardware.
If you're not sure about the size of the pilot holes to drill, consult the manufacturer's instructions for the hardware.
Be careful not to overtighten the screws, as this can damage the hardware or the cabinet.

Conclusion:

Adding kitchen cabinet hardware is a simple and cost-effective way to give your kitchen a fresh look. By following these steps, you can easily update your cabinets and create a more cohesive and stylish kitchen.